Gui For Point To Multipoint Communication System

Abstract

Point to multi-factor radio uses to get to devise of FDMA and utilizations Time Division Duplexing mode. Radio is worked in two modes as base and remote. Base radio might interface with 6 Remote radios. Most intense separation between Base and Remote radio is 15Km. Radio is applied as part of repetitive association at Base. Radio Switching Unit (RSU) is applied to Base station to pick out sound Radio. Bar exchanging reception apparatus (BSA) is utilized at Base radio and Parabolic Reflected Antenna's (PRA) are applied at Remote stations. Radio twine Rotation Control Units (ARCU) is utilized at each Remote station to assist PRA turn. Radio and RSU should deliver administration interface utilizing SNMP V2 conference. Radio should provide 64Kbps throughput from Base to remote and 160Kbps throughput from Remote to Base station. The whole System Consist of two base radios, six remote radios, one RSU and six ARCU gadgets. GUI is applied to Configure Radio with the aid of sending arrangement parameters to the P1021 processor, handles receiving wire Rotation with the aid of sending Commands to

ARCU unit and shows Radio fame parameter, alerts got from the P1021 processor to consumer. GUI additionally used to pick out the Radio Switching process by means of sending summons to RSU unit.