A Study on Waste Management in a Construction Industry

Prajwal G Gudigar, Devanand R, Harsha H N

Abstract


It is value engineering effort coupled withtechnical insights sound planning and envisioning which can yield a successful wastemanagement system

Keywords


Waste management; value engineering; green building; reuse; reduce or recycleand optimization.

Full Text:

PDF

References


V.Bharathi and Dr.R.Paranthaman “Application of Value Engineering in Construction

Building” Indian journal of applied research (2013).

Apurva J Chavan “VALUE ENGINEERING IN CONSTRUCTION INDUSTRY”

International Journal of Application or Innovation in Engineering & Management

(IJAIEM) (2013)

Jillian K Seidel and W. Mac Ware “Value Engineering Trends in the Construction

Industry” Construction Systems Management Program of the Ohio State University

(2012).

Jeffrey S. Russell, Kevin E. Swiggum, Jeffrey M. Shapiro, and Achmad F. Alaydrus

“CONSTRUCTABILITY RELATED TO TQM, VALUEENGINEERING, AND

COST/BENEFITS” Journal of Performance of Constructed Facilities, Vol. 8, (1994).

Babatunde and Solomon Olusola “Quantitative Assessment of Construction Materials

Wastage in the Nigerian Construction Sites” Journal of Emerging Trends in Economics and Management Sciences (JETEMS) 3(3): 238-241 (2012).

Ayarkwa, J, K. Agyekum and E. Adinyira “EXPLORING WASTE MINIMIZATION

MEASURES IN THE GHANAIAN CONSTRUCTION INDUSTRY” Built

Environmental Journal Vol. 8, No. 2, 22-30, (2011).

Vivian W.Y. Tam “On the effectiveness in implementing a waste-management-plan method in construction” Griffith university (2008).

Carlos T. Formoso, Lucio Soibelman M.ASCE, Claudia De Cesare, and Eduardo L.

Isatto “Material Waste in Building Industry: Main Causesand Prevention” journal of construction engineering and management 316/ 325 (2002).

B.A.G.Bosssink and H.J.H.Brouwers “Construction Waste: Quantification and Source

Evaluation” Journal of Construction Engineering and Management (1996).

A Masood, T Ahmad, M Arif and F Mahadi, “Waste Management Startagies for concrete”, Environ Engg Policy 3, 2002.

Bruce McDonald and Mark Smithers, “Implementing wastage management plan during construction phase of a project”, Construction Management and Economics, 2008.

C. S. Poon, Ann T. W. Yu and L. Jaillon, “Reducing building waste at construction sites in Hong Kong” Construction Management and Economics, 2004

Carlos Torres Formoso, Eduardo Luís Isatto, and Ercilia Hitomi Hirota, “Method for waste control in building Industry”, University of California, Berkeley, CA, USA 1999.

Chun-Li Peng, Domenice E. Scorpio and Charles J. Kibert, “Strategies for successful construction and demolition waste refscycling operations” Construction Management and

Economics, 1997

George Ofori, “Construction Material waste source evalusation” Proceedings:

Strategies for a Sustainable Built Environment, Pretoria, 23-25 August 2000.

Jennie Morton, “Going to Pieces over modular construction”, Buildings (12)11.

Mark Lennon, “Recycling Construction and Demolition Wastes – A Guide for Architects and Contractor”, Institution of recycling Network, 2005.

Mohamed M. Matar, Maged E. Georgy and Moheeb Elsaid Ibrahim, "Sustainable construction management: introduction of the operational context space” Construction Management and Economics, 2008.




Bookmark and Share


Copyright (c) 2014 Prajwal G Gudigar, Devanand R, Harsha H N

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

 

All published Articles are Open Access at  https://journals.pen2print.org/index.php/ijr/ 


Paper submission: ijr@pen2print.org