Fabrication and Experimental Investigation of Banana and Sisal Fibers
Abstract
Natural fibers, such as sisal, Banana, flax and jute, possess good reinforcing capability when properly compounded with polymers. These fibers are relatively inexpensive, originate from renewable resources and possess favorable values of specific strength and specific modulus. Thermoplastic polymers have a shorter cycle time as well as reprocess ability despite problems with high viscosities and poor fiber wetting. The renewability of natural fibers and the recyclability of thermoplastic polymers provide an attractive ecofriendly quality to the resulting natural fiber-reinforced thermoplastic composite materials. Common methods for manufacturing natural fiber-reinforced thermoplastic composites are injection moulding and extrusion which tend to degrade the fibers during processing. Development of a simple manufacturing technique for sisal fiber, banana fiber composites, that minimizes fiber degradation and can be used in developing countries, is the main objective of this study. Combination of sisal and banana fibers possesses good reinforcing capability when properly compounded with polymers.
Keywords
Banana and Sisal Fibers; Experimental Investigation
Full Text:
PDFCopyright (c) 2015 M. Easwaramoorthi, S. Sathiyamoorthi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All published Articles are Open Access at https://journals.pen2print.org/index.php/ijr/
Paper submission: ijr@pen2print.org