3 Axis Cnc Programme Generation of Cover Plate

B Naga Pavan Kumar Reddy, Shaik Abzal Basha, A. Vidyasagar


Cover plate is used to hold the amplifiers, resistors and other circuit parts in electrical circuit box. It is clamped to entire circuit box like cap. The component requires both inside and outside machining. So it needs a special type of fixture to hold the component rigidly. For this, the component is top clamped. This process done in CNC Machines.


Process planning is function within the manufacturing facility that establishes which processes and parameters are to be used (as well as those machines capable of performing these processes) to convert a work piece to a finished part from its initial form to the final one predetermined in a engineering drawing.


The main aim of this project is to optimize the machining time of electronic cover  plate. This process done by developing fixture for manufacturing of cover plate. NX-CAD is used for developing design of cover plate and fixture and NX-CAM is used for performing manufacturing process and generating NC program for cover plate.


Full Text:


Copyright (c) 2019 Edupedia Publications Pvt Ltd

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


EduPedia Publications Pvt Ltd, D-351, Prem Nagar-2, Suleman Nagar, Kirari, Nagloi, New Delhi PIN-Code 110086, India Through Phone Call us now: +919958037887 or +919557022047

All published Articles are Open Access at https://edupediapublications.org/journals/

Paper submission: editor@edupediapublications.com or edupediapublications@gmail.com

Editor-in-Chief       editor@edupediapublications.com

Mobile:                  +919557022047 & +919958037887

Websites   https://edupediapublications.org/journals/.

Journals Maintained and Hosted by

EduPedia Publications (P) Ltd in Association with Other Institutional Partners


Pen2Print and IJR are registered trademark of the Edupedia Publications Pvt Ltd.