Automatic Test Packet Generation

K.L. Narsimha Rao, A Chiranjeevi


Networks are getting larger and more complex, yet administrators rely on rudimentary tools such as and to debug problems. We propose an automated and systematic approach for testing and debugging networks called “Automatic Test Packet Generation” (ATPG). ATPG reads router configurations and generates a device-independent model. The model is used to generate a minimum set of test packets to (minimally) exercise every link in the network or (maximally) exercise every rule in the network. Test packets are sent periodically, and detected failures trigger a separate mechanism to localize the fault. ATPG can detect both functional (e.g., incorrect firewall rule) and performance problems (e.g., congested queue). ATPG complements but goes beyond earlier work in static checking (which cannot detect liveness or performance faults) or fault localization (which only localize faults given liveness results). We describe our prototype ATPG implementation and results on two real-world data sets: Stanford University’s backbone network and Internet2. We find that a small number of test packets suffices to test all rules in these networks: For example, 4000 packets can cover all rules in Stanford backbone network, while 54 are enough to cover all links. Sending 4000 test packets 10 times per second consumes less than 1% of link capacity. ATPG code and the datasets are publicly available.

Index Terms—Data plane analysis; network troubleshooting; test packet generation

Full Text:


Copyright (c) 2015 K.L. Narsimha Rao, A Chiranjeevi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


All published Articles are Open Access at 

Paper submission: