Dynamic Stability Improvement of PMSG-Based Wind Turbine Generators Fed to a Power System Using PID controller Based STATCOM
Abstract
This paper presents the stability-improvement results of four parallel-operated offshore wind turbine generators (WTGs) connected to an onshore power system using a static synchronous compensator (STATCOM). In this project have the fast advance of high-capacity power-electronics technology, large commercial wind turbine generators can be practically employed to contribute high generated power to power systems, where wind PMSGs with full back to-back converters have proven to be good choices for high-power WTGs. Basically, the grid side converter of the PMSG-based WTG can be operated as a STATCOM.
Keywords: Dynamic stability; permanent-magnet synchronous generator (PMSG); static synchronous compensator; MATLAB; wind turbine generator (WTG)
Keywords: Dynamic stability; permanent-magnet synchronous generator (PMSG); static synchronous compensator; MATLAB; wind turbine generator (WTG)
Full Text:
PDFCopyright (c) 2016 B. Nageswara Rao, K. Kranthi Pratap Singh
![Creative Commons License](http://licensebuttons.net/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All published Articles are Open Access at https://journals.pen2print.org/index.php/ijr/
Paper submission: ijr@pen2print.org