Desgin And Anaylsis Of Miniature Positive Displacment Of Pump
Abstract
The design aimed at providing the down-stream sector of the petroleum industry and the small scale industry with an indigenous pump that could deliver about 4.09123x10-4m3/s (24.55litre/minute) of hydraulic oil. Pump is a device that enables mechanical energy to be imparted to a fluid and manifests in pressure energy increase. Pumps have wide applications in science and engineering including, public water supply, irrigation, up-steam/down-stream petroleum sector, auto-mobile, haulage equipment and chemical dosage. Gear pump is the main choice of fuel system designers due to long life, low maintenance cost and high performance. In this thesis, the static analysis is to determine the deformation ,stress and strain at different speeds (4000 and 2000 Rpm)of the gear pump for different materials (mild steel, stainless steel and C24 steel). In this the CFD analysis ie to determine the pressure Drop, velocity,and mass flow rates at different mass flow rates(24.55,40 and 60lit/min). 3D modeling by the CREO parametric software ,analysis done inANSYS
Full Text:
PDFCopyright (c) 2017 Edupedia Publications Pvt Ltd
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
All published Articles are Open Access at https://journals.pen2print.org/index.php/ijr/
Paper submission: ijr@pen2print.org