Electronic Voting Machine Using Finger Print Module

Abstract

The secured electronic voting machine using finger print module is the most widely deployed publicized biometrics for identification. This is largely due to its easy and cost effective integration in existing and upcoming technologies. The integration of biometric with electronic voting machine using iris undoubtedly requires less manpower, save much time of voters and personnel eliminate rigging, ensure accuracy, transparency and fast results in election. In this paper, a framework for electronic voting machine based on biometric verifications proposed and implemented. The proposed framework ensures secured identification and authentication processes for the voters and candidates through the use of fingerprint and iris biometrics.

Various types of verification process are used, most procedure are publican verified by the representative of candidates of competing parties. Recount is also possible if there is any fraud or error. Conventional voting systems are not efficient due to long period of preparation, bogus voting, include papers, punch cards, mechanical levers, optical scan machines. These systems are not efficient as they are conducted manually and therefore very often are not accurate. As a consequence, it is obligatory to carry the available voting through an electronic system.This project uses two power supplies, one is regulated 5V for modules another one is 3.3V for LPC2148. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of230/12V step down transformer.

The secured electronic voting machine using finger print module is the most widely deployed publicized biometrics for identification. This is largely due to its easy and cost effective integration in existing and upcoming technologies. The integration of biometric with electronic voting machine using iris undoubtedly requires less manpower, save much time of voters and personnel eliminate rigging, ensure accuracy, transparency and fast results in election. In this paper, a framework for electronic voting machine based on biometric verifications proposed and implemented. The proposed framework ensures secured identification and authentication processes for the voters and candidates through the use of fingerprint and iris biometrics.

Various types of verification process are used, most procedure are publican verified by the representative of candidates of competing parties. Recount is also possible if there is any fraud or error. Conventional voting systems are not efficient due to long period of preparation, bogus voting, include papers, punch cards, mechanical levers, optical scan machines. These systems are not efficient as they are conducted manually and therefore very often are not accurate. As a consequence, it is obligatory to carry the available voting through an electronic system.This project uses two power supplies, one is regulated 5V for modules another one is 3.3V for LPC2148. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of230/12V step down transformer.